A few days after the announcement, new details emerge on the ASUS Zenfone 11 Ultra

Thanks to last month’s previews, we know almost everything about the new one ASUS Zenfone 11 Ultrawhich has now passed through the certifying body Wireless Power Consortium revealing the design front and some interesting features on the recharge (if you are looking for a new Android smartphone, don’t miss our selections of the best, both overall and in terms of camera or battery life).

As for the design, we can see how the new top of the Taiwanese brand (passed by the institution with the model number AI2401_H) will have a central hole for the front camera and a flat display with very small frames on all four sides. The physical buttons, power and volume rocker, will be located on the right side of the device.

Moving on to the technical information, we can see how the Wireless Power Consortium has certified the device for a maximum power load of 12W wirelessly, although it seems strange that Zenfone 11 Ultra present a wireless charging lower than that of Zenfone 10, which is 15W, so it is possible that there is an error and refers to the minimum load.

Below you can see it instead TUV certificationwhich confirms the model number AI2401_xxxx, shared by the Zenfone 11 Ultra with the ROG Phone 8 series. The xxxx part denotes the device ID and can be made up of numbers (0-9), letters (AZ), or left blank .

This certificate indicates the top-up wired at 65Wwhich already appeared in previous previews of the device.

From the point of view of technical specifications, here is what we can expect thanks to the leak of the past few days: